|
Data Structures |
| struct | OOH323Ports |
| | This structure is used to define the port ranges to be used by the application. More...
|
| struct | OOH323EndPoint |
| | Structure to store all configuration information related to the endpoint created by an application. More...
|
Defines |
|
#define | DEFAULT_TRACEFILE "trace.log" |
|
#define | DEFAULT_TERMTYPE 50 |
|
#define | DEFAULT_PRODUCTID "objsys" |
|
#define | DEFAULT_CALLERID "objsyscall" |
|
#define | DEFAULT_T35COUNTRYCODE 0xB5 |
|
#define | DEFAULT_T35EXTENSION 0 |
|
#define | DEFAULT_MANUFACTURERCODE 0x0036 |
|
#define | DEFAULT_H245CONNECTION_RETRYTIMEOUT 2 |
|
#define | DEFAULT_CALLESTB_TIMEOUT 60 |
|
#define | DEFAULT_MSD_TIMEOUT 30 |
|
#define | DEFAULT_TCS_TIMEOUT 30 |
|
#define | DEFAULT_LOGICALCHAN_TIMEOUT 30 |
|
#define | DEFAULT_ENDSESSION_TIMEOUT 15 |
|
#define | DEFAULT_H323PORT 1720 |
| #define | TCPPORTSSTART 12030 |
| #define | TCPPORTSEND 12230 |
| #define | UDPPORTSSTART 13030 |
| #define | UDPPORTSEND 13230 |
| #define | RTPPORTSSTART 14030 |
| #define | RTPPORTSEND 14230 |
|
#define | ooEndPoint OOH323EndPoint |
Functions |
| EXTERN int | ooH323EpInitialize (enum OOCallMode callMode, const char *tracefile) |
| | This function is the first function to be invoked before using stack.
|
| EXTERN int | ooH323EpApplyConfig (const OOConfigFile *pconfig) |
| | This function applies configuration parameters to the global H.323 endpoint variable.
|
| EXTERN int | ooH323EpSetAsGateway () |
| | This function is used to represent the H.323 application endpoint as gateway, instead of an H.323 phone endpoint.
|
| EXTERN int | ooH323EpSetLocalAddress (const char *localip, int listenport) |
| | This function is used to assign a local ip address to be used for call signalling.
|
| EXTERN int | ooH323EpSetTCPPortRange (int base, int max) |
| | This function is used to set the range of tcp ports the application will use for tcp transport.
|
| EXTERN int | ooH323EpSetUDPPortRange (int base, int max) |
| | This function is used to set the range of udp ports the application will use for udp transport.
|
| EXTERN int | ooH323EpSetRTPPortRange (int base, int max) |
| | This function is used to set the range of rtp ports the application will use for media streams.
|
| EXTERN int | ooH323EpSetTraceLevel (int traceLevel) |
| | This function is used to set the trace level for the H.323 endpoint.
|
| EXTERN int | ooH323EpAddAliasH323ID (const char *h323id) |
| | This function is used to add the h323id alias for the endpoint.
|
| EXTERN int | ooH323EpAddAliasDialedDigits (const char *dialedDigits) |
| | This function is used to add the dialed digits alias for the endpoint.
|
| EXTERN int | ooH323EpAddAliasURLID (const char *url) |
| | This function is used to add the url alias for the endpoint.
|
| EXTERN int | ooH323EpAddAliasEmailID (const char *email) |
| | This function is used to add an email id as an alias for the endpoint.
|
| EXTERN int | ooH323EpAddAliasTransportID (const char *ipaddress) |
| | This function is used to add an ip address as an alias.
|
| EXTERN int | ooH323EpClearAllAliases (void) |
| | This function is used to clear all the aliases used by the H323 endpoint.
|
| EXTERN int | ooH323EpSetH225MsgCallbacks (OOH225MsgCallbacks h225Callbacks) |
| | This function is used to set the H225 message callbacks for the endpoint.
|
| EXTERN int | ooH323EpSetH323Callbacks (OOH323CALLBACKS h323Callbacks) |
| | This function is used to set high level H.323 callbacks for the endpoint.
|
| EXTERN int | ooH323EpDestroy (void) |
| | This function is the last function to be invoked after done using the stack.
|
| EXTERN int | ooH323EpEnableAutoAnswer (void) |
| | This function is used to enable the auto answer feature for incoming calls.
|
| EXTERN int | ooH323EpDisableAutoAnswer (void) |
| | This function is used to disable the auto answer feature for incoming calls.
|
| EXTERN int | ooH323EpEnableManualRingback (void) |
| | This function is used to enable manual ringback.
|
| EXTERN int | ooH323EpDisableManualRingback (void) |
| | This function is used to disable manual ringback.
|
| EXTERN int | ooH323EpEnableMediaWaitForConnect (void) |
| | This function is used to enable MediaWaitForConnect.
|
| EXTERN int | ooH323EpDisableMediaWaitForConnect (void) |
| | This function is used to disable MediaWaitForConnect.
|
| EXTERN int | ooH323EpEnableFastStart (void) |
| | This function is used to enable faststart.
|
| EXTERN int | ooH323EpDisableFastStart (void) |
| | This function is used to disable faststart.
|
| EXTERN int | ooH323EpEnableH245Tunneling (void) |
| | This function is used to enable tunneling.
|
| EXTERN int | ooH323EpDisableH245Tunneling (void) |
| | This function is used to disable tunneling.
|
| EXTERN int | ooH323EpEnableGkRouted (void) |
| | This function is used to enable GkRouted calls.
|
| EXTERN int | ooH323EpDisableGkRouted (void) |
| | This function is used to disable Gkrouted calls.
|
| EXTERN int | ooH323EpSetProductID (const char *productID) |
| | This function is used to set the product ID.
|
| EXTERN int | ooH323EpSetVersionID (const char *versionID) |
| | This function is used to set version id.
|
| EXTERN int | ooH323EpSetCallerID (const char *callerID) |
| | This function is used to set callerid to be used for outbound calls.
|
| EXTERN int | ooH323EpSetCallingPartyNumber (const char *number) |
| | This function is used to set calling party number to be used for outbound calls.Note, you can override it for a specific call by using ooCallSetCallingPartyNumber function.
|
|
void | ooH323EpPrintConfig (void) |
| | This function is used to print the current configuration information of the H323 endpoint to log file.
|
| EXTERN int | ooH323EpAddG728Capability (int cap, int txframes, int rxframes, int dir, cb_StartReceiveChannel startReceiveChannel, cb_StartTransmitChannel startTransmitChannel, cb_StopReceiveChannel stopReceiveChannel, cb_StopTransmitChannel stopTransmitChannel) |
| | This function is used to add G728 capability to the H323 endpoint.
|
| EXTERN int | ooH323EpAddG729Capability (int cap, int txframes, int rxframes, int dir, cb_StartReceiveChannel startReceiveChannel, cb_StartTransmitChannel startTransmitChannel, cb_StopReceiveChannel stopReceiveChannel, cb_StopTransmitChannel stopTransmitChannel) |
| | This function is used to add G729 capability to the H323 endpoint.
|
| EXTERN int | ooH323EpAddG7231Capability (int cap, int txframes, int rxframes, OOBOOL silenceSuppression, int dir, cb_StartReceiveChannel startReceiveChannel, cb_StartTransmitChannel startTransmitChannel, cb_StopReceiveChannel stopReceiveChannel, cb_StopTransmitChannel stopTransmitChannel) |
| | This function is used to add G7231 capability to the H323 endpoint.
|
| EXTERN int | ooH323EpAddG711Capability (int cap, int txframes, int rxframes, int dir, cb_StartReceiveChannel startReceiveChannel, cb_StartTransmitChannel startTransmitChannel, cb_StopReceiveChannel stopReceiveChannel, cb_StopTransmitChannel stopTransmitChannel) |
| | This function is used to add G711 capability to the H323 endpoint.
|
| EXTERN int | ooH323EpAddGSMCapability (int cap, ASN1USINT framesPerPkt, OOBOOL comfortNoise, OOBOOL scrambled, int dir, cb_StartReceiveChannel startReceiveChannel, cb_StartTransmitChannel startTransmitChannel, cb_StopReceiveChannel stopReceiveChannel, cb_StopTransmitChannel stopTransmitChannel) |
| | This function is used to add a new GSM capability to the endpoint.
|
| EXTERN int | ooH323EpAddH263VideoCapability (int cap, unsigned sqcifMPI, unsigned qcifMPI, unsigned cifMPI, unsigned cif4MPI, unsigned cif16MPI, unsigned maxBitRate, int dir, cb_StartReceiveChannel startReceiveChannel, cb_StartTransmitChannel startTransmitChannel, cb_StopReceiveChannel stopReceiveChannel, cb_StopTransmitChannel stopTransmitChannel) |
| | This function is used to add H263 video capability to the H323 endpoint.
|
| EXTERN int | ooH323EpEnableDTMFRFC2833 (int dynamicRTPPayloadType) |
| | This function is used to enable rfc 2833 support for the endpoint.
|
| EXTERN int | ooH323EpDisableDTMFRFC2833 (void) |
| | This function is used to disable rfc 2833 support for the endpoint.
|
| EXTERN int | ooH323EpEnableDTMFH245Alphanumeric () |
| | This function is used to enable the H245(alphanumeric) dtmf capability for the endpoint.
|
| EXTERN int | ooH323EpDisableDTMFH245Alphanumeric () |
| | This function is used to disable the H245(alphanumeric) dtmf capability for the endpoint.
|
| EXTERN int | ooH323EpEnableDTMFH245Signal () |
| | This function is used to enable the H245(signal) dtmf capability for the endpoint.
|
| EXTERN int | ooH323EpDisableDTMFH245Signal () |
| | This function is used to disable the H245(signal) dtmf capability for the endpoint.
|
| EXTERN int | ooH323EpSetGkClientCallbacks (OOGKCLIENTCALLBACKS gkClientCallbacks) |
| | This function is used to add callbacks to the gatekeeper client.
|
| EXTERN int | ooH323EpSetBearerCap (const char *configText) |
| | This function is used to set the bearer capability that will be used to create the Q.931 bearer capability IE.
|
